KVMS
CONTACT
NEWS
SERVICES
USED EQT
PRODUCTS
HOME
KVMS
HOME » PRODUCTS» SMT WERTHEIM


The company founder´s aspiration was and continues to be until today, not only to bring the most technically sophisticated and innovative products to the market place, but they must be most environmentally friendly, most economical in terms of energy consumption and most maintenance friendly products at the same time. An aspiration which is also reflected in the company statutes and in the DIN EN ISO 9001-compliant Quality Management Manual.

All SMT systems of the Quattro Peak series from "S Media up to XL Plus" are manufactured with a high, consistent quality standard in Germany. Low consumption, constant process parameters and quick maintenance options distinguish the systems. They are, of course, suitable for the processing of ceramic substrates as well as for the curing of adhesives, pottants and other heating processes. 

The heating of the component assemblies is achieved via full convection. Whereby the innovative air guiding system in the SMT QUATTRO PEAK®-Zone effects an extremely efficient heat transfer and allows process gas temperatures that are significantly lower than it is usual on the market.

Quattro Peak S
 
Forced Convection Reflow Soldering System 
SMT Quattro Peak® S (N2) 

The smallest unit with the time-tested Quattro Peak® technology. Ideal for the highest demands on quality and efficiency for medium throughput.

Process are length 3876 mm 
Pre-heating zones: 3
Peak zone (top/bottom): 2
Heated tunnel length, total  2598 mm 
 Active convection length  2060,5 mm


Quattro Peak M

Forced Convection Reflow Soldering System 
SMT Quattro Peak® M (N2)

 
Proven and tested for mid-range up to high serial throughput and for high performance. With patented Quattro Peak® concept. Accurate and easy adjustment to variable tasks.

Process are length 4326 mm 
Pre-heating zones: 3
Peak zone (top/bottom): 2
Heated tunnel length, total  3048 mm 
 Active convection length  2510,5 mm

Quattro Peak L

Forced Convection Reflow Soldering System 
SMT Quattro Peak® L (N2)
 

Strongest throughput. With patented Quattro Peak® concept for high capacities within the serial productions environment. 
Fulfils the highest requirements in terms of flexibility.

Process are length 5432 mm 
Pre-heating zones: 4
Peak zone (top/bottom): 2
Heated tunnel length, total  3680 mm 
 Active convection length  3142,5 mm

Quattro Peak L plus

Forced Convection Reflow Soldering System 
SMT Quattro Peak® L Plus (N2) 


With the new developed Quattro Peak® Plus concept for very complex devices within a large batch production environment. Guarantees highest equipment utilisation, with the maximum of stability at highest throughput.

Process are length 6392 mm 
Pre-heating zones: 5
Peak zone (top/bottom): 3
Heated tunnel length, total  4167 mm 
 Active convection length  3629,5 mm


Quattro Peak XL

Forced Convection Reflow Soldering System 
SMT Quattro Peak® XL (N2) 

Strongest throughput. With patented Quattro Peak® concept for high performance, high speed and serial productions. 
Fulfils the highest requirements in terms of flexibility.

Process are length 6853,5 mm 
Pre-heating zones: 5
Peak zone (top/bottom): 3
Heated tunnel length, total  4628 mm 
Active convection length  4090,5 mm


Vacuum reflow module

"Vacuum Plus" is a system for improving quality of solder joints. Voids are reduced in a vacuum chamber which significantly improves the quality of the soldered product.

  1. Voids will be reduced up to 99%, solder joints quality optimized 
  2. Double sided PCBs 
  3. Suitable for PCBs, DCB, stamping grid and carrier 
  4. Setting Parameter: evacuation time; vacuum hold time; ventilation time; vacuum pressure 
  5. Only one sealing surface of the vacuum chamber 


CONTACT FORM
If you have a question or query about our products or services please use this form. Then click on the CONTACT US button.
Contact us
Company
Slachthuisstraat 30/3
2300 TURNHOUT
BELGIUM

+32 14 72 00 62
Copyright © 2019 - All rights reserved